UT40E Automatic 2 Post Car Lift
Delivered on a pallet — it needs offloading. Do you have a forklift on site?
Key features
UT40E Automatic 2 post car lift Now With 3-Stage Arms
This Eurotek UT40E 4 ton 2 post ramp has been built with affordable quality in mind, unlike some of our competitors this 2 post lift has double height screw pads as standard which adjust from a low 110mm in 2 stages all the way up to 150mm which covers all variant heights of floor pans and if that's not enough we also include a set of four 60mm height pad extensions ideal for avoiding the side steps on 4x4's and a set of four 90mm extensions for lifting van's and avoiding sill damage. Although this ramp is capable of lifting some van's it is not specifically designed for long wheel-based vans. As an alternative to this 4 tonne 2 post lift we can offer a 2 post van lift with a huge 5 tonne lifting capacity and longer reach 3-stage arms specifically designed for long wheel based vans, take a look at the Eurotek UT50E 5 Tonne 2 Post Car Lift.
For added safety the Eurotek UT40E comes complete with a fully electronic safety release system so the locks are always engaged when you are working under the lift.
Eurotek lifts are tested and certified to UKCA & CE standards bearing the recognised UKCA & CE mark and are supplied with a 12 month parts only warranty for your piece of mind.
The Eurotek UT40E Top Features:
- 4-ton lifting capacity
- Twin Hydraulic Cylinders for powerful lifting
- Fan Assisted Finned Motor with 2.2 KW Power
- Available in 240V or 415V without effecting the performance.
- Lifting Speed of less than 45s
- Double height screw pads adjustable from 90 mm - 150 mm on 3-Stage Arms
- 60 mm & 90 mm screw pad extensions for added pad height.
- Automatic safety release system
- Automatic arm locking system.
UT40E Specifications:
- LIFTING CAPACITY - 4000KG
- MAXIMUM LIFTING HEIGHT - 1910MM
- INITIAL PAD HEIGHT - 110MM
- APROXIMATE LIFTING TIME - <45 SECONDS.
- APPROXIMATE DECENT TIME - <45 SECONDS
- POWER REQUIRMENT - 240V/415V
- OVERALL HEIGHT - 2850MM
- OVERAL WIDTH - 3420MM
- INTERNAL WIDTH - 2616MM
- MOTOR POWER - 2.2KW
- WHOLE MACHINE WEIGHT - 616KG
Are you concerned about the depth or strength of your concrete? If so then we have a car ramp specifically designed for this problem. Check out the Platinum 42FE Full based 'H-Frame' 2 post lift. This ramp is manufactured with a supporting frame that bolts to the floor and then the lift bolts to the frame.
Installation Available across the UK
